Sony 300PF Operating Instructions Manual page 16

Location and Function of Parts
j Lithium backup battery warning
k DVCAM indication
l Cassette memory indication
m Audio mode indications
n Warning indications
o Service indication
p Battery capacity indication
16
Chapter 1 Overview
Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this
indication appears, replace the lithium backup battery immediately.
For further information about replacing lithium battery, see "Inserting and Replacing
the Lithium Battery" (page 31).
Disappears when the cassette being played back is not for DVCAM format.
Appears when using a cassette with cassette memory.
These show audio recording/playback mode.
Fs32k: 4-channel mode (32kHz sampling frequency)
Fs48k: 2-channel mode (48kHz sampling frequency)
For further information about selecting audio recording mode, see "Selecting Audio
Recording Mode Menu 212" (page 97).
Include the following.
RF: Appears when the video heads are clogged, or when there is a fault in the
recording system.
SERVO: Appears when the servo lock is not functioning.
HUMID: Appears when there is condensation on the drum.
SLACK: Appears when there is a tape winding fault.
For measures against warning indications, see "Warning System" (page 115).
Appears during maintenance on VCR menu operations (page 92). It does not appear
during normal operation.
This indicates the battery capacity and voltage as shown below.
Change menu setting for the battery you are using.
For menu settings, see "Selecting Battery Capacity Indication
94).
Indication
BATT E[pppppp]F
BATT E[pppppp]F
BATT E[pppppp]F
BATT E[pppppp]F
BATT E[pppppp]F
BATT E[pppppp]F (blinking)
BATT E[pppppp]F (blinking)
BATT E[pppppp]F (blinking)
1)Replace the battery pack when this indication appears.
Menu 206" (page
Battery voltage
BP-L40/L60/L60A/
L90/L90A
15.0 V or more 12.5 V or more
14.0 to 15.0 V 12.0 to 12.5 V
13.0 to 14.0 V 11.75 to 12.0 V
12.0 to 13.0 V 11.5 to 11.75 V
11.3 to 12.0 V 11.3 to 11.5 V
1)
11.25 to 11.3 V 11.25 to 11.3 V
11.0 to 11.25 V 11.0 to 11.25 V
11.0 V or less 11.0 V or less
NP-1B/BP-90A
(Continued)