Sony BLU-RAY DISC BDP-BX57 Operating Instructions Manual page 22

Cinema Conversion Mode
Auto
Video
Output Video Format
HDMI
Component
Video
Video
z
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
"Component Video."
• If no picture appears when setting "HDMI" or
"Component Video" resolution, try another
resolution setting.
BD/DVD-ROM 1080/24p Output
Auto
Off
22
Normally select this. The
player automatically detects
whether the material is
video-based or film-based,
and switches to the
appropriate conversion
method.
The conversion method
suited for video-based
material will always be
selected regardless of the
material.
Normally select "Auto."
Select "Original Resolution"
to output the resolution
recorded on the disc. When
the resolution is lower than
the SD resolution, it is scaled
up to the SD resolution.
Select the resolution that
suits your TV.
Automatically sets the
lowest resolution.
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
Select this when your TV is
not compatible with 1080/
24p video signals.
YCbCr/RGB (HDMI)
Auto
Automatically detects the
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB
Outputs RGB video signals.
HDMI Deep Color Output
Auto
Normally select this.
12bit Outputs 12bit/10bit video
signals when the connected
10bit
TV is compatible with Deep
Color.
Off Select this when the picture
is unstable or colors appear
unnatural.
Pause Mode
Auto
Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.