Usb Device; Network Connection - Sony BDV-L600 Operating Instructions Manual

USB device

Symptom
The USB device is not
recognized.
BRAVIA Internet Video
Symptom
The picture/sound is poor/certain
programs display with a loss of
detail, especially during fast-
motion or dark scenes.
The picture is small.
"BRAVIA" Sync ([Control for HDMI])
Symptom
The [Control for HDMI]
function does not work
("BRAVIA" Sync).

Network connection

Symptom
The system cannot connect to the
network.
Problems and solutions
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
• Make sure that the USB device is securely connected to the
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the main unit.
Problems and solutions
• Picture/sound quality may be poor depending on Internet content providers.
• Picture/sound quality may be improved by changing the connection speed.
Sony recommends a connection speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-definition video.
• Not all videos contain sound.
• Press X to zoom in.
Problems and solutions
• Check that [Control for HDMI] is set to [On] (page 65).
• If you change the HDMI connection, turn the system off and on again.
• If power failure occurs, set [Control for HDMI] to [Off], then set [Control for
HDMI] to [On] (page 65).
• Check the following and refer to the operating instructions supplied with the
component.
– the connected component is compatible with the [Control for HDMI]
function.
– the connected component's setting for the [Control for HDMI] function is
correct.
Problems and solutions
• Check the network connection (page 23) and the network settings (page 66).
(USB) port.
73
GB