Using The Sleep Timer; Deactivating The Buttons On The Unit; Controlling Your Tv With The Supplied Remote - Sony BDV-E470 Operating Instructions Manual

9
Press X/x to select [Off], then press
.
Note
• The test tone signals are not output from the HDMI
OUT jack.
Tip
• To adjust the volume of all the speakers at one time,
press VOL +/–.

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 10
minutes.
Press SLEEP.
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10 minutes.
When you set the sleep timer, "SLEEP" flashes
in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
Deactivating the Buttons
on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
Press x on the unit for more than 5
seconds.
"CHILD LOCK" and "ON" appear in the front
panel display.
The child lock function is activated and the
buttons on the unit are locked. (You can operate
the system by using the remote.)
54
US
To cancel, press x for more than 5 seconds so
that "CHILD LOCK" and "OFF" appear in the
front panel display.
Note
• When you operate the buttons on the unit while the
child lock function is on, "CHILD LOCK" appears in
the front panel display.
Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
Note
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Preparing the remote for
controlling the TV
Press and hold TV [/1 while entering your
TV's manufacturer's code (see the table)
using the number buttons. Then release TV
[/1.
If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.
Code numbers of controllable
TVs
If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.
Manufacturer Code number
SONY 01 (default)
SAMSUNG 02, 06
PANASONIC 05
LG 02
TOSHIBA 04
SHARP 03