HP MSM775 zl Installation Manual page 14

1 1. Use the arrow keys to select the DEFAULT_VLAN cell for port A1.
12. Assign MSM775_Int to port A1, and MSM775_LAN to port A2. Use the space bar to change
values and the arrow keys to move between items. Moving from left to right, set port A1 to
No, Untagged, No. Set port A2 to No, No, Untagged. Ports A1 and A2 should now look like
this:
NOTE:
For example, you could set ports A3 and A4 to use the same VLAN as the LAN port,
MSM775_LAN in this example. You could then connect access points to ports A3 and A4 of
the Ethernet module.
14 Initially connecting and configuring
Consider reserving additional ports for connecting access points to the LAN port.