Table of Contents
Advertisement
This guide, and the MSM Controllers Configuration Guide, use the terms Internet port and LAN
port to refer to the Ethernet interfaces on the controller, instead of the port names on the switch.
NOTE:
The "i" suffix on the ports indicates that it is an internal port. A third internal port (D3i in
the example) is displayed, but is nonfunctional.
Define and assign VLANs
1.
At the switch CLI prompt, enter:
menu
2.
Press Enter.
3.
Select Switch Configuration.
4.
From the Switch Configuration menu, select VLAN Menu.
Configure the switch for the controller
1 1
Hide quick links:
Advertisement
Table of Contents
