Triple Watch
Triple Watch mode monitors channels 16 and 9 for a signal
while you listen to the currently-selected channel. The marine
radio checks channel 16 and 9 for activity every 2 seconds.
1. Press and hold
2. Press and hold
disappears.
While in Triple Watch mode, you can change the currently
selected channel using
NOTE
DROP-OUT DELAY
While scanning, the radio stops on channels when it receives
a signal. When the received signal is over, there is a drop-out
delay of 2 seconds for the return of the signal. After 2 seconds,
if the signal does not return, the radio resumes scanning.
BATTERY SAVE
This feature extends the battery life by switching the receiver
circuit power on and off. Battery Save automatically activates
during standby mode (RX mode without signal).
BACKLIGHTING
The Liquid Crystal Display (LCD) is backlit for easy viewing
at night or in low light situations. Backlighting automatically
switches on every time a key is pressed (except PTT and
BOOST) and off 10 seconds after the last key is pressed.
1. Press the Backlight icon (
level/color displays.
2. Press the icon again and the backlight level/color changes in
the following order:
White High (default) - White Medium - White Low - Amber
High - Amber Medium - Amber Low - White High, etc.
to activate Triple Watch. TRI displays.
16/9 TRI
again to exit Triple Watch. TRI
16/9 TRI
Uniden Atlantis 155 Owner's Manual
or CH
CH
and the current backlight
)
.
E-23