Sony 3-452-779-11(1) Operating Instructions Manual page 44

b
• If the picture is distorted or no picture
appears, wait for about 30 seconds without
pressing any buttons. The display returns to
the resolution setting screen.
If the selected video output resolution is
incorrect, no picture will appear on the
screen when you press any button within that
30 seconds. In this case, press x on the
player for more than 10 seconds to reset the
video output resolution to the lowest
resolution.
• When connecting the HDMI OUT jack and
other video output jacks at the same time,
video signals may not output from the jacks,
other than from the HDMI OUT jack, when
"Auto" or "1080p" is selected.
When connecting other equipment at the
same time, press RETURN to return to step
2 and change the "TV Connection Method"
setting.
HDMI Resolution/Component Resolution
Auto (HDMI
only)
480i/576i
480p/576p
720p
1080i
1080p (HDMI
only)
44
Normally select this.
The player outputs
signals starting from the
highest resolution
acceptable to the TV:
1080p > 1080i > 720p >
480p > 480i
If the resulting image
format is undesirable,
try another setting that
suits your TV.
Outputs 480i/576i video
signals.
Outputs 480p/576p
video signals.
Outputs 720p video
signals.
Outputs 1080i video
signals.
Outputs 1080p video
signals.
BD-ROM 1080/24p Output
Sets to output 1920
×
signals when playing film-based materials on
BD-ROMs (720p/24 Hz or 1080p/24 Hz).
1920 × 1080p/24 Hz video signals can be
output when all of the following conditions
are met.
– You connect a 1080/24p-compatible TV
using the HDMI OUT jack,
– "Output Video Format" is set to "HDMI,"
and
– "HDMI Resolution" is set to "Auto" or
"1080p."
The 24P indicator lights up when outputting
1920 × 1080p/24 Hz video signals.
Auto
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
On Outputs 1920 × 1080p/
24 Hz video signals
regardless of the connected
TV type.
Off Select this when your TV is
not compatible with 1080/
24p video signals.
b
No BD-ROM picture appears when the connected
TV is non-compatible with 1080/24p and "BD-
ROM 1080/24p Output" is set to "On." In this case,
press HOME to display the home menu, and change
the "BD-ROM 1080/24p Output" setting.
1080p/24 Hz video