s To Run Initial Setup Again or Auto
Program at a Later Time
Select the Initial Setup feature from the XMB
or perform the steps described in the Initial
Setup section on page 42. To run Auto
Program, see page 37.
s To Add Digital Channels
Use the Add Digital Channels feature as
described on page 37. (Useful for antenna
• If you accidentally turn off the TV during the Initial
Setup process, the Initial Setup will restart from the
beginning when the TV is turned back on.
• Auto Program may be canceled while the channels
are being scanned. Press RETURN first, then press
either B/b on the remote control. Select Yes to cancel
or No to resume Auto Program.