Sony UP-D23MD Instructions For Use Manual

Sony UP-D23MD Instructions For Use Manual

Digital color printer
Hide thumbs Also See for UP-D23MD:

Advertisement

3-207-489-11 (1)
Digital Color Printer
Instructions for Use
UP-D23MD
© 2003 Sony Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Sony UP-D23MD

  • Page 1 3-207-489-11 (1) Digital Color Printer Instructions for Use UP-D23MD © 2003 Sony Corporation...
  • Page 2 Owner's Record The model and serial numbers are located at the rear. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________ Serial No. ____________________ WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture.
  • Page 3 For the customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again harmful interference when the equipment is operated in a commercial environment.
  • Page 4: Table Of Contents

    Table of Contents Getting Started System Overview ... 5 System Configuration ... 5 Location and Function of Parts and Controls ... 5 Front Panel ... 5 Rear Panel ... 6 Supplied Accessories ... 6 Assembly ... 7 Connections ... 7 USB Port Connection ...
  • Page 5: Getting Started

    Getting Started System Overview The UP-D23MD digital color printer is designed to reproduce computer images on A-6 size paper. You can print out computer image data in full color (with 256 shades per color, a total of more than 16,700,000 colors in all) in high resolution print mode (approximately 403 dpi).
  • Page 6: Rear Panel

    F Paper output slot Printed pages are ejected here. G Paper tray (7) Load paper into this tray. H ! POWER switch (12) Press this switch to turn the printer on or off. Rear Panel (USB) connector (7) Connects to a computer or another USB peripheral device with a USB cable (supplied).
  • Page 7: Assembly

    Assembly To attach the paper tray For details of how to load the ink ribbon and paper, see “Loading an Ink Ribbon” on page 9 and “Loading Paper” on page 11. Paper tray Connections After connecting the USB connecting cable (supplied) to the printer and the computer, connect the power cord.
  • Page 8: Installing The Printer Driver

    • USB 2.0 supports Hi-speed USB, in addition to the existing Full (Low) speed. • The UP-D23MD can be connected as Full-speed in a USB 1.1 environment. However, to use the UP- D23MD with Hi-speed USB functions in a USB 1.1 environment, the following requirements must be met.
  • Page 9: Operation

    Operation Before Printing This section describes the operations below that must be made before printing, but after mounting the paper tray on the printer (see “Assembly” on page 7) and after making the necessary connections (see “Connections” on page 7). •...
  • Page 10 Remove any slack from the ink ribbon. Note If the ribbon is left slack, it may be damaged when inserted. Wind the spools in the direction of the arrow until the start position marker appears as illustrated. Load the new ink ribbon into the ink ribbon compartment.
  • Page 11: Loading Paper

    Loading Paper To load paper, follow the procedure below. Be careful not to touch the printing surface. Notes • Use only paper recommended. Failing to do so is likely to result in malfunctions such as paper jams. (See “Ink Ribbon and Paper” on page 15.) •...
  • Page 12: Printing

    To prevent them from being pushed, attach the supplied stopper as illustrated. Insert the edge of the paper tray into this groove. Note Do not leave more than 10 sheets of ejected printouts on the paper tray. Doing so may cause a paper jam. Printing Printing Before printing...
  • Page 13 accumulated on the paper tray. The printer will start automatically to print the remaining copies. If the printer does not print The printer will fail to print when the ALARM, PAPER, and/or RIBBON indicator light. For details, see “Indicators on the Front Panel” on page If the paper or ink ribbon runs out during printing The printer stops the printing operation.
  • Page 14: Miscellaneous

    • If the unit malfunctions or if a foreign body falls into the cabinet, disconnect the AC power cord immediately and consult your Sony service facility or your Sony dealer. Installation •...
  • Page 15: Cleaning

    Cleaning Note Be sure to turn off the power of the printer before cleaning. Cleaning the cabinet Clean the cabinet, panel and controls with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.
  • Page 16: Specifications

    Specifications Power requirements 100 to 120 V AC, 50/60 Hz (for 100 to 120 V AC users) 220 to 240 V AC, 50/60 Hz (for 220 to 240 V AC users) Input Current 1.8 A max. at 25°C (for 100 to 120 V AC users) 1.0 A max.
  • Page 17: Troubleshooting

    Should the problem persist after you have applied the remedy, unplug the unit and contact your Sony dealer or local authorized Sony service facility. Symptoms Possible causes and remedies The printer does not •...
  • Page 18: If The Paper Jams

    Indicators Possible cause and remedies Lighting Blinking ALARM • The front panel is open. tClose the front door • Paper has jammed inside the printer. tRemove any jammed • The maximum number of printouts has accumulated on the paper tray. tRemove the printouts.
  • Page 19 Pull the back cover plate up and remove it from the printer. Remove the jammed paper slowly, turning the gear slowly in the direction of the arrow. If you still cannot remove the paper Do not try to remove it forcibly. Contact your nearest Sony dealer. If the Paper Jams...
  • Page 20 Replace the back cover plate. Note When you put it back, be careful not to catch your fingers or any other object in the back cover plate. Secure the back cover plate using the screws removed in step 4. Confirm that the screw holes of the back side of the printer and the back cover plate match before securing them.
  • Page 21: Index

    Index Accessories assembly 7 paper tray 6 thermal head cleaning cartridge 6 USB connecting cable 6 Alarm indicating the problem using the indicators 17 Cleaning cabinet 15 thermal head 15 Connections 7 Getting Started 5 Ink ribbon loading 9 notes on storing 10 Location and function of parts and controls front panel 5...
  • Page 22 Sony Corporation...

Table of Contents