Honeywell NXL Series Applications Manual page 48

Page 48 (68)
2.7.22 Actual value supervision function
0 = Not used
1 = Warning, if actual value falls below the limit set with par. 2.7.23
2 = Warning, if actual value exceeds the limit set with par. 2.7.23
3 = Fault, if actual value falls below the limit set with par. 2.7.23
4 = Fault, if actual value exceeds the limit set with par. 2.7.23
2.7.23 Actual value supervision limit
With this parameter you can set the limit of actual value supervised by par. 2.7.22
2.7.24 Actual value supervision delay
Set here the delay for the actual value supervision function (par. 2.7.22)
If this parameter is in use, the function of par. 2.7.22 will be active only when the actual value
stays outside the defined limit for the time determined by this parameter.
4
Description of parameters
Honeywell