Specifications - Hitachi UHD8410PC Instructions Manual

Check the following:
Make sure that "the correct driver is installed for the
USB device"
Other Issues: Check the USB cable
Symptom: System hour and date is not correct.
Check the following:
You can adjust system clock and date from BIOS or
operating system. If the system clock and date is not
displaying the value you have entered every time
you turn the system on, your BIOS battery may be
dead and you may need to change it. Consult to the
technical service regarding this matter.
Restarting the "INTERACTIVE BOARD"
product
If your "INTERACTIVE BOARD" system is frozen or
stopping frequently because of an error, you may need
to restart your system.
In case the product does not respond to an attempt
to shut down from the operating system, hold down
the power button for 4 seconds.
Important!
Shutting "INTERACTIVE BOARD" down as described
above results in loss of all unsaved data.
Warning!
This is an A class device. This device may cause
radio interference in households and in similar places.
Therefore, user shall take the required precautions.
Specifications and this manual may be modified
without prior notification. Complies with WEEE
Regulation.

SPECIFICATIONS

Model Name
Cabinet
Display Specifications
Native Resolution
Backlight Type
Brightness (Typical)
Contrast Ratio
(Typical)
Viewing Angle
Aspect Ratio
Active Screen Area
Orientation
Displayable Colors
Monitor Specifications
Control Buttons
Touch Screen
Glass
I/O Ports
- 27 -
UHD8410PC - UHD8410
84990
Aluminum Front Cover
Metal Back Cover
WHITE / BLACK
3840x2610
Edge LED
350
1400
89
16:9
84.04 inches
(2134.62mm) diagonal
Landscape
RGB
PC On/Off
Source Menu / Exit
Touch On/Off
Brightness / Volume Sele-
tion (Function Select)
Brightness / Volume Level
Increase
Brightness / Volume Level
Decrease
Infrared Touch Screen
(10 Points touch screen
support)
AR-Anti Reflective, AG-
Anti Glare
1 x VGA In
1 x HDMI In (HDMI 1.4)
1 x HDMI In (HDMI 2.0)
1 x USB B-type connector
(for external touch screen
usage only)
1 x Line In
1 x Line Out
RS-232 Connection