Sonance Virtuoso V831SSDR Specification Sheet

Sonance Virtuoso SSDR-Series Speakers
®
Sonance Virtuoso SSDR® speakers combine the outputs of your
amplifier's left and right stereo channels, and play both signals
from just one speaker. Totally redesigned for 2006, these new
Virtuoso SSDR speakers incorporate advanced driver materials
and technology that give them stunning musical performance.
Virtuoso SSDR speakers are ideal for use in hallways, bath-
rooms, closets, or any location where a pair of stereo speakers
would be impractical. The Virtuoso SSDR's innovative fully-
pivoting design delivers outstanding musical performance from
a wide variety of challenging installation locations.

Features:

• Completely redesigned for 2006 with dramatically improved
sound quality and quicker/easier installation.
• Fully-pivoting woofer assembly directs sound at listeners, for
superior sound even when placement options are limited.
• Advanced driver materials deliver extremely accurate musical
performance.
• 8" Diameter woofers deliver deep, powerful bass.
• Graphite-Reinforced ABS (GRABS) woofer baskets reduce
resonances.
• 3-Position midrange and tweeter adjustment switches (V833ss
• Exclusive new FastMount tabs hold speaker in the mounting
®
hole during installation, allowing installer to let go of the speaker
to pick-up tools or other items.
• RotoLock mounting system simplifies installation.
®
• Paintable aluminum grilles.
• Optional Retrofit Enclosure reduces sound spillover from rear of
speaker into adjacent spaces.
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
w w w . s o n a n c e . c o m
®2006 Dana Innovations. Sonance, Virtuoso, Sonic Eye, RotoLock and FastMount are trademarks or registered trademarks of Dana Innovations. All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to www.sonance.com
Single-Stereo Speakers
Virtuoso V833ss
DR
).
DR

Optional Accessories:

Virtuoso FlexBracket (part# 92247): Plastic template
DR
to reserve a mounting hole for the speaker in new
construction. Note: Not for use with Architectural
Finish Installation Kits.
Virtuoso Coverplate (part# 92245): Covers the hole
DR
made by the FlexBracket during construction until
the speaker is installed.
Sonance Virtuoso

SPECIFICATIONS

V833
SSDR
Tweeter: Two ¾" (19mm) Silk domes, Ferrofluid cooled
Midrange: Two 3" (76mm) Carbon Fiber cones, rubber
surrounds
Woofer: 8" (203mm) Carbon Fiber cone, dual voice coil,
rubber surround, pivoting
Frequency Response: 32Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 150 Watts maximum
SPL: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" x 6" (286mm x 152mm)
1
Cutout Diameter: 10 / " (257mm)
8
Shipping Weight: 10 lbs. (4.5kg) Each
V831
SSDR
Tweeter: Two ¾" (19mm) Silk domes, Ferrofluid cooled
Midrange: Two 3" (76mm) Polypropylene cones, rubber
surrounds
Woofer: 8" (203mm) Polypropylene cone, dual voice
coil, rubber surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 Watts minimum; 100 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: None
Dimensions (Dia. x D): 11¼" x 6" (286mm x 152mm)
1
Cutout Diameter: 10 / " (257mm)
8
Shipping Weight: 8 lbs. (3.6kg) Each

DIMENSIONS

(all Virtuoso SSDR-Series speakers)
10
1
/ "
8
6"
Virtuoso
enclosure that reduces sound transmission into
adjacent rooms and spaces. Can be used in both
new construction and retrofit installations.
Virtuoso
ASTM E 119 and UL2043 criteria for commercial
installations.
® SSDR-Series
Virtuoso V833
Virtuoso V831
11¼"
Retrofit Enclosure (part# 92243): Molded
DR
Fire-Rated Back Can (part# 91908): Meets
DR
SSDR
SSDR
04/06