Table of Contents
Advertisement
3e-250 Bluetooth to RS-232 Cordless Adapter
Configuration Commands for the 3e-250 Adapter
There are some configuration commands that can be useful in chang-
ing or adapting configuration settings on the 3e-250 Adapter. You can
access these commands by plugging the 3e-250 into a laptop and opening
a Hyper Terminal window (as described in the Setup section).
NOTE: The Adapter will only interpret these commands when there
is no Bluetooth connection between it and a remote Bluetooth device.
The chart on the following page contains a description of the currently
available commands. You can also access these commands by typing help
in the Hyper Terminal window.
Troubleshooting
Manufacturer's Statement
The 3e-250 Bluetooth to RS-232 Cordless Adapter is provided with
warranty. It is not desired or expected that the user open the device. If
malfunction is experienced and all external causes are eliminated, the
user should return the unit to the manufacturer for service and replace it
with a functioning unit. If you are experiencing trouble with this unit, the
point of contact is:
support@3eti.com
or visit our website at
www.3eti.com
Advices and Warnings
Opening the case of the 3e-250 Adapter voids the warranty.
The internal batteries must be in place for the Adapter to work, even
in AC Power mode.
Return the device to the manufacturer for service.
10
Advertisement
Table of Contents
