10. Change door lock E over to the oppo-
site side, screw down the door interlock.
11. On the other side, insert cover F and al-
low snap-in button to lock into place.
12. Insert loading door and hinges into re-
cesses on the front of the machine and
screw down.
Note regarding contact protection: The
machine is only secure for operations again
once all plastic parts have been inserted.
Special accessories
• stack kit
Available from your Service Force Cen-
tre or your specialist dealer
These intermediate installation kits can
be used to arrange the dryer and an wash-
ing machine (60 cm wide, front loaded)
as a space-saving washer/dryer stack.
The washing machine is at the bottom
and the dryer is at the top.
Read carefully the instructions supplied
with the kit.
• drain kit
Available from your Service Force Cen-
tre or your specialist dealer
Installation kit for direct draining of con-
densate into a basin, siphon, gully, etc.
The condensate tank then no longer has
to be drained, it must however remain in
its intended position in the machine.
Read carefully the instructions supplied
with the kit.
• pedestal with the drawer
Available from your Service Force Cen-
tre or your specialist dealer
To situate the dryer in optimal high and
have some additional space to store (e.g.
laundry).
Read carefully the instructions supplied
with the kit.
55