Initial Setup Via Bluetooth - Ubiquiti UniFi Cloud Key Gen2 Plus Quick Start Manual

Initial Setup via Bluetooth

Use the UniFi Mobile app to configure the UniFi Cloud Key.
1. Download the UniFi Mobile app from the App Store® (iOS)
or Google Play
2. Enable Bluetooth on your mobile device.
3. Launch the app and hold your mobile device within 1.5 m
(5') of the UniFi Cloud Key.
4. In the Discovered Devices section, tap the
5. Follow the on-screen instructions.
The username and password you configure in the UniFi Mobile
app will be used for the pre-installed UniFi Controller and UniFi
Video® 4 software.
(Android).
™
icon.
Tap
This
Icon