Cisco MX300G2 Manual page 35

Troubleshooting
Table of contents
Introduction
Development tools on the web interface
Create a user interface
Sign in to the video system's web interface with administrator credentials,
navigate to
API for in-room control Development Tools.
Widgets
Overview of all widgets and their status
Command reference
The Widget State Overview window lists all widgets, and their status. The status
is shown in the Current Value column.
Troubleshooting Troubleshooting
If the Current Value column is empty, the widget has not been initialized and has
no value. We recommend that the control system initializes all widgets when it
initially connects to the video system.
Tips and tricks
Examples
D15358.01 APRIL 2016
Collaboration Endpoint software
version 8.1
Widget status
© 2016 Cisco Systems, Inc.
All rights reserved.
Integration > In-Room Control. Click the arrow to show the
Send value updates to the video system
A control system sends
SetValue
update a widget. For test puposes, you can use the Update Value column in the
Widget State Overview window to simulate a control system.
Enter a value in one of the input fields to immediately send the corresponding
command to the video system. The CurrentValue column (status) will
SetValue
be updated, and the Touch 10 in-room control panel changes accordingly.
Click Unset to clear the value of the widget (send an
If a control system is connected to the video system, the Current Value and
Update Value columns may come out-of-sync. The Current Value column
always shows the current status, regardless of whether the
is sent from a real control system, or from the Update Value column.
35
commands to the video system, telling it to
command).
UnsetValue
command
SetValue
Send command
to update widget