Safety Statement; Warning Statement - Samsung VRR P10 Product Manual

Warning：
Please read the installation instruction carefully before installing the display to

avoid the risk of injury to the user;
Spare parts are used to replace broken parts, such as power lines, data lines,

Sending boxes, etc. Parts for other manufacturer's products are not allowed to
be used on the VRR P10;
Please follow the assembly instructions when installing the cabinet. If you

encounter any problems during the installation, please contact Samsung in time.
Product Care
The cabinet should be kept dry and clean. It is recommended that users conduct

safety inspections and visual inspection on all products regularly; checking
whether the cables and LED lamps are damaged or not. The damaged part
needs to be repaired or replaced in time.

2.2 Safety Statement

Please read the instruction carefully.

Please pay attention to the warning signs of the various parts inside and outside

the cabinet.
Please follow the instructions of the product manual.

While cleaning the cabinet, using neutral, make sure they are non-abrasive,

non-corrosive, non-marking materials or reagents.
To prevent the risk of electric shock, ensure that the cabinet is properly grounded

when it is installed.
When performing the screen/hanging screen, the operator should wear anti-static

equipment, and the operation should be careful and careful to prevent the
cabinet from falling.
After the screen installation and connection is completed, do not step on the plug,

socket, power/signal cable.
Please use the accessories/accessories specified by our company.


2.3 Warning Statement

Do not open the internal equipment of the cabinet to reduce the risk of electric

shock. If modules has dead lamps, or the parts of the cabinet are damaged,
professional maintenance personnel should be required for maintenance.
If the power cord in the cabinet is damaged, do not try to repair the power cord.

Please replace the power cord with professional maintenance personnel.
Moisture-proof: The maximum relative humidity of the work should be less than

90%.
Dustproof: Do not place the display in a dusty environment and clean the surface

of the display regularly.
Dehumidification: Do not adjust the screen directly to the maximum brightness,

but gradually increase it.
5 / 50