GOT1000 Startup Guide
This document provides a simple guide and reference for setting up the
GT1020 or GT1030 Graphic Operation Terminal (GOT) hardware and
firmware for use with an FX Series PLC.
The GT1020 and GT1030 are monochrome, 3-color backlight, two
communication channel GOT1000 Series touch panel interfaces, and consist
of the following models:
For new GT1020 and GT1030 units, included in the box should be the
GT1020/GT1030 (A), 1 PLC Communication Connector (B), 1 rubber Panel
Mounting Packing (C), and 4 Panel Mounting Brackets (D).
All GT1020/GT1030 GOTs except for the GT1020-LBL
and GT1020-LBLW (5V DC versions) require an external 24V
DC power supply to be connected to the Power Terminal on
the back of the GOT. The 5V DC versions are powered
Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.