Table of Contents
Advertisement
INSTALLATION
Connect the drain hose
Installation
Install your new washing machine on a flat level floor
as near to a 2pin 220 volt AC socket outlet and water
tap as possible.
Keep the unit at least 5cm from walls or other fixtures
to avoid accidental contact during operation.
The groundwire which is indicated by green colour must
be firmly connected to a special groundwire. Please call
the technician to assemble.
The socket should have assembled the 3A fuse.
Do not cut or extend the power cord.
Do not operate the unit if the power cord is damaged or
cracked.
Do not place the power cord on wet or damp floors.
Do not attempt to repair or replace the power cord, if the
power cord is damaged.
qualified service personnel only.
4
Please pull out the rubber stopple
at the end of the drain hose before
use.
WARNING:
To avoid the danger of choke,
keep the stopple away from
babies and children.
Do not operate
and refer repair to
Advertisement
Table of Contents
