Download  Print this page

Exhaust System - Kawasaki KX250F 2017 Owner's Manual

Hide thumbs


Install the washer with the metal side upwards to
the cylinder head cover, and tighten the bolts to
the specified torque.
Tightening Torque
Cylinder Head Cover Bolts:
10 N·m (1.0 kgf·m, 89 in·lb)
Install the two caps to the magneto cover.
Tightening Torque
Timing Inspection Cap:
3.5 N·m (0.36 kgf·m, 31 in·lb)
Flywheel Nut Cap:
3.5 N·m (0.36 kgf·m, 31 in·lb)
Install the removed parts.

Exhaust System

The exhaust system, in particular the muffler body,
is designed to reduce exhaust noise and conduct
the exhaust gases away from the rider while mini-
mizing power loss. If carbon has built up inside the
muffler body, exhaust efficiency is reduced, causing
engine performance to drop.
If the muffler body is badly damaged, dented,
cracked or rusted, replace it. Replace the silencer
wool if the exhaust noise becomes too loud or en-
gine performance drops.
Silencer Wool Replacement
Remove the seat bolt, radiator shroud bolt and
side cover bolt.


Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: