Download  Print this page

Throttle Body Assy - Kawasaki KX250F 2017 Owner's Manual

Hide thumbs

Advertisement

A. Adjuster
B. Locknut
With the engine idling, turn the handlebars both
ways and check if handlebars movement changes
the idle speed. If so, the throttle cable may be im-
properly adjusted or incorrectly routed, or dam-
aged. Be sure to correct any of these conditions
before riding.
WARNING
Operation with improperly adjusted, incor-
rectly routed, or damaged cables could result
in an unsafe riding condition. Be sure the
control cables are adjusted and routed cor-
rectly, and are free from damage.
MAINTENANCE AND ADJUSTMENT 63

Throttle Body Assy

Idle Speed Adjustment
Thoroughly warm up the engine.
Turn the idle adjusting screw/choke knob to adjust
the idle speed 2 000 ~ 2 100 r/min (rpm) by using
the engine revolution tester (The tester should be
followed by the method described by the manu-
facture.).
A. Idle Adjusting Screw/Choke Knob
B. Tester
Open and close the throttle a few times to make
sure the idle speed does not change, and readjust
if necessary.
With the engine idling, turn the handlebars both
ways and check if handlebars movement changes
the idle speed. If so, the throttle cable may be

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: