chain midway between the engine
sprocket and rear wheel sprocket.
A. Chain Slack
If the drive chain is too tight or too
loose, adjust it so that the chain
slack is within the standard value.
Drive Chain Slack
Standard: 30 ~ 35 mm (1.2 ~ 1.4 in.)
MAINTENANCE AND ADJUSTMENT
Drive Chain Slack Adjustment
If a torque wrench is not available,
this item should be serviced by an
authorized Kawasaki dealer.
Remove the seat and the tool kit
(see Seat section in the GENERAL
Remove the hook wrench by remov-
ing the hook wrench mounting bolts.