Download  Print this page

How To Ride The Motorcycle; Break-in; Starting The Engine - Kawasaki Ninja H2R 2016 Owner's Manual

Hide thumbs

Advertisement

102

HOW TO RIDE THE MOTORCYCLE

HOW TO RIDE THE MOTORCYCLE

Break-In

A brief break-in procedure must be
carried out to obtain the proper operat-
ing clearances in the engine and trans-
mission, which are necessary for
performance and reliability.
WARNING
Cold tires do not provide good
grip and may cause loss of con-
trol or a crash resulting in injury
or death. To prevent loss of grip,
use tire warmers to heat the tires
before riding for an hour.
Break in the engine as follows.
1. Ride the vehicle for about 30 mi-
nutes within 4 000 r/min (rpm).
2. Ride the vehicle for about 30 mi-
nutes within 6 000 r/min (rpm).
3. Change the engine oil and the oil fil-
ter.
4. After the break-in procedure has
been properly carried out, ride the
vehicle while gradually raising the
engine speed, and confirming the
vehicle state and the characteristic.

Starting the Engine

Check that the engine start/stop
switch is in the
position.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: