Be careful not to damage the FOB
when replacing the FOB battery.
Be sure to install the (+) side of
battery to the correct installation.
Do not touch the electrical parts,
or electrical circuit on the inside
of the FOB.
Avoid to replace the battery
where heavy dust is blowing.
Do not make the dust insert into
Do not force to disassemble the
FOB when replacing the battery.
Do not touch the battery or termi-
nal of the FOB with the bare
hands when replacing the bat-
When the battery voltage of the FOB
LOW BATTERY" warning message
is not displayed in the multifunction
If the key knob is turned to "ON" po-
sition by bringing the FOB to the igni-
tion switch within 2 cm (0.8 in.) with
the battery of the FOB discharged,
"TRANSPONDER LOW BATTERY"
warning message is not displayed in
the multifunction meter when turning
the key knob to "OFF" position, and
message is not displayed in the mul-
tifunction meter even if the motor-
cycle goes away with the FOB left.