MAINTENANCE AND ADJUSTMENT
Final Gear Case Oil
About 160 mL (5.41 US
Hypoid gear oil
above 5°C (41°F) SAE 90
below 5°C (41°F) SAE 80
"GL-5" indicates a quality and addi-
tive rating. "GL-6" rated hypoid gear
oils can also be used.
Install the filler cap with a new O-
ring. Tighten it to the specified tor-
Replace the O-ring with a new one.
6.0 N·m (0.61 kgf·m, 53 in·lb)
Coolant Level Inspection
Position the motorcycle so that it is
perpendicular to the ground.
Check the coolant level through the
coolant level gauge on the reserve
tank located to the left of the engine.
The coolant level should be between
the F (Full) and L (Low) level lines.