Wipe off any lubricant that gets on
the tire surface.
Drive Chain Slack Inspection
Set the motorcycle up on its side
Clean the chain if it is dirty, and lubri-
cate it if it appears dry.
Rotate the rear wheel to find the po-
sition where the chain is tightest, and
measure the maximum chain slack
by pulling up and pushing down the
MAINTENANCE AND ADJUSTMENT
chain midway between the engine
sprocket and rear wheel sprocket.
A. Chain Slack
If the drive chain is too tight or too
loose, adjust it so that the chain
slack is within the standard value.
Drive Chain Slack
Standard: 25 ~ 35 mm (1.0 ~ 1.4 in.)