Download  Print this page

Advertisement

60
HOW TO RIDE THE MOTORCYCLE
Connecting Jumper Cables
Make sure the ignition switch is
turned off.
Remove the seat (see Seat section
in the GENERAL INFORMATION
chapter).
Slide the cap from the positive (+)
terminal (see Battery section in the
MAINTENANCE
MENT chapter).
Connect a jumper cable from the
positive (+) terminal of the booster
battery to the positive (+) terminal of
the motorcycle battery.
NOTICE
Be careful not to contact the
jumper cable slip on the positive
battery terminal to the frame, or it
will cause a short circuit.
AND
ADJUST-
A. Motorcycle Battery Positive (+) Terminal
B. From Booster Battery Positive (+) Terminal
C. Unpainted Metal Surface
D. From Booster Battery Negative (–) Termi-
nal
Connect another jumper cable from
the negative (–) terminal of the boos-
ter battery to your motorcycle un-
painted metal surface. Do not use
the negative (–) terminal of the bat-
tery.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: