A. Projections (Both Sides)
B. Grommets (Both Sides)
Tighten the side cover bolt on both
Tool Kit Case/Tool Kit
The tool kit case is located under the
left side cover.
Keep the tool kit in the original place.
Remove the quick rivet and open the
tool kit case.
A. Tool Kit Case
B. Quick Rivet
C. Tool Kit
The tool kit case uses the quick rivet.
The quick rivet can be removed by
pushing the central pin into the quick
rivet, and when installing it, pull the
central pin fully up first, and then
push into the central pin after insert-