Download  Print this page

Kawasaki KLX150L 2013 Owner's Manual Page 119

Hide thumbs

Advertisement

118
MAINTENANCE AND ADJUSTMENT
Condensation may form on the in-
side of the headlight lens after riding
in the rain, washing the motorcycle
or humid weather. To remove the
moisture, start the engine and turn
on the headlight. Gradually the con-
densation on the inside of the lens
will clear off.
Semi-gloss Finish
To clean the semi-gloss finish;
When washing the motorcycle, al-
ways use a mild neutral detergent
and water.
The semi-gloss finish effect may be
lost when the finish is excessively
rubbed.
If any doubt, consult an authorized
Kawasaki dealer.
Other Plastic Parts
After washing use a soft cloth to gen-
tly dry plastic parts. When dry, treat the
headlight lens and other nonpainted
plastic parts with an approved plastic
cleaner/polisher product.
NOTICE
Plastic parts may deteriorate and
break if they come in contact with
chemical substances or house-
hold cleaning products such as
gasoline, brake fluid, window
cleaners, thread-locking agents,
or other harsh chemicals. If a
plastic part comes in contact with
any harsh chemical substance,
wash it off immediately with
water and a mild neutral deter-
gent, and then inspect for dam-
age. Avoid using abrasive pads
or brushes to clean plastic parts,
as they will damage the part's fin-
ish.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: