Download  Print this page

Kawasaki Ninja ZX-10R 2013 Owner's Manual Page 53

Hide thumbs

Advertisement

52
GENERAL INFORMATION
Status
Normal
Engine informa-
tion communica-
tion error
Battery voltage
Low voltage ABS
decreases
ABS error
The ABS indicator light may go on under certain riding conditions (ex. The front
or rear wheel spins). In this case, first turn the ignition key to "OFF", and then
back to "ON". This should reset the ABS indicator light, but if it remains lit after
the motorcycle runs at approximately 5 km/h (3.1 mph) or more for more than
one minute , you should have the ABS checked by an authorized Kawasaki deal-
er.
When the ABS indicator light is blinking, the ABS has been in the low voltage
mode (insufficient battery voltage). When it is in the low voltage mode, the KIBS
system does not function, but the ABS functions. To recover the KIBS system,
turn the ignition switch OFF and charge the battery. If the battery is fully charged
Brake Condition
KIBS
ABS
Normal brake
ABS Indicator
Warning Indicator
Light
Light (Yellow)
Goes off
Goes off
Blinks
Goes on
NOTE
Multifunction Me-
Goes off
Goes on
Goes off
Goes off
ter
None
KIBS
None
None

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: