The gear position indicator display
mode can be shifts while the motor-
cycle is at a stop:
Select the stop watch mode. Refer to
the "Multifunction Display" item in
While the motorcycle is at a stop,
push and hold the upper button until
the mode has been shifted.
The selection of the gear position in-
dicator display mode is maintained if
the ignition switch is turned "OFF".
When the battery is disconnected,
the gear position indicator display
mode is resets to normal mode.
If the race mode display is selected,
the clock is not displayed.
To adjust hours and minutes, do the
followings while the motorcycle is at a
Turn the ignition switch to "ON".
Display the odometer in the multi-
function display. Refer to the "Multi-
function Display" item in this section.
Push the lower button for more than
2 seconds. Both the hour and minute
displays start flashing.