Download  Print this page

Kawasaki Ninja ZX-10R 2013 Owner's Manual Page 39

Hide thumbs

Advertisement

38
GENERAL INFORMATION
button momentarily when the stop
watch is stopped.
When the lap number is displayed "–
–", the displayed time is the total time
of all timed laps.
To reset the stop watch and erase all
lap numbers and times, push the
lower button and hold it in until the
stop watch resets to zero.
NOTE
If the ignition switch is turned "OFF"
while the lap time/number is dis-
played, the total time of all timed laps
is displayed when the ignition switch
is turned "ON".
If the stop watch mode is shifted to
other modes during displaying the
lap time/number, the lap time or total
time of all timed laps are displayed
when the stop watch mode is re-
slected.
If the ignition switch is turned "OFF"
while counting the lap time, current
lap time is cleared. However, pre-
vious lap times are stored and pre-
vious lap time or total time of all
timed laps are displayed when the
ignition switch is turned "ON".
When the battery is disconnected,
the stop watch is resets to zero.
If the "FUEL" warning is displayed in
the multifunction display, the coolant
temperature or the intake air temper-
ature is displayed instead of lap
number. However the time measure-
ment is not interrupted.
If the coolant temperature rises
above 115°C (239°F) with the lap
number displayed, the lap number
display in the Lap Counter/Coolan-
t/Intake Air Temperature Meter auto-
matically
shifts
temperature meter.
to
the
coolant

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: