Download  Print this page

Kawasaki Ninja ZX-10R 2013 Owner's Manual Page 185

Hide thumbs

Advertisement

184
MAINTENANCE AND ADJUSTMENT
If the above chargers are not avail-
able, use equivalent one.
For more details, ask your Kawasaki
dealer.
Battery Charging
Remove the battery from the motor-
cycle (see Battery Removal).
Attach the leads from the charger
and charge the battery at a rate (am-
perage x hours) that is indicated on
the battery. If it is not possible to read
the rate, charge the battery at an am-
perage that is about 1/10th of the
battery capacity.
The charger will keep the battery
fully charged until you are ready to
reinstall the battery in the motorcycle
(see Battery Installation).
NOTICE
Never remove the sealing strip,
or the battery can be damaged.
Do not install a conventional bat-
tery in this motorcycle, or the
electrical system cannot work
properly.
Make
Yuasa Battery
ZX1000J: YTZ7S (F)
Type
ZX1000K: YTZ10S
NOTE
If you charge the sealed battery,
never fail to observe the instructions
shown in the label on the battery.
Battery Removal
Remove the rider's seat (see Seats
section in the GENERAL INFORMA-
TION chapter).

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: