Brake Light Switches
When either the front or rear brake is
applied, the brake light goes on. The
front brake light switch requires no ad-
justment, but the rear brake light switch
should be adjusted in accordance with
the Periodic Maintenance Chart.
Turn the ignition key to "ON".
The brake light should go on when
the front brake is applied.
If it does not, ask an authorized Ka-
wasaki dealer to inspect the front
brake light switch.
MAINTENANCE AND ADJUSTMENT
Check the operation of the rear
brake light switch by depressing the
brake pedal. The brake light should
go on after the proper pedal travel.
A. Brake Pedal
B. 10 mm (0.4 in.)
If it does not, adjust the rear brake
Brake Pedal Travel
10 mm (0.4 in.)