MAINTENANCE AND ADJUSTMENT
If a torque wrench is not available,
this item should be serviced by an
authorized Kawasaki dealer.
Rotate the wheel, measure the chain
slack again at the tightest position,
and readjust if necessary.
Install a new cotter pin through the
axle nut and axle, and spread its
A. Cotter Pin
When inserting the cotter pin, if the
slots in the nut do not align with the
cotter pin hole in the axle shaft, tight-
en the nut clockwise up to the next
It should be within 30 degrees.
Loosen once and tighten again when
the slot goes past the nearest hole.
A. Turn Clockwise