Download  Print this page

Kawasaki VN1700 Voyager Custom ABS 2010 Owner's Manual Page 36

Hide thumbs


When the K-ACT ABS indicator light
is blinking, the K-ACT ABS has been
in the low voltage mode (the battery
voltage decreases). When it is in the
low voltage mode, the K-ACT system
does not function, but the ABS func-
tions. The ignition switch is turned off
to recover the K-ACT system. At this
time, the battery must be in the nor-
mal condition. If the low voltage
mode continues, you should have
the K-ACT ABS checked by an au-
thorized Kawasaki dealer.
Warning Indicator Light : The warn-
ing indicator light goes on and blinks
when a problem occurs in the digital
fuel injection/electronic throttle valve
system, oil pressure, or charging sys-
tem. If the warning indicator light blinks
and the warning symbol is displayed,
have the digital fuel injection/electronic
throttle valve system checked by an
authorized Kawasaki dealer.
Warning Symbols -
: The warning indicator light
under the warning symbols indicator
and the oil pressure warning symbol
) in the LCD digital meter both go
on whenever the oil pressure is dan-
gerously low or the ignition switch is in
the ON position with the engine not
running, and they go off when the en-
gine oil pressure is high enough. Refer
MENT chapter for more detailed en-
gine oil information.


Table of Contents

This manual is also suitable for:

Vn1700 voyager custom abs 2013

Comments to this Manuals

Symbols: 0
Latest comments: