Push the "MODE-B" switch and hold
After two seconds, the display turns
to 0.0 and then starts counting when
the motorcycle is operated. The me-
ter counts until it is reset.
The data are maintained by the
back-up power even if the ignition
key is turned to "OFF".
When the trip meter is reset while
the motorcycle is at a stop, counting
starts as soon as it starts moving.
When the trip meter display reaches
9999.9 (TRIP A) or 999.9 (TRIP B)
while running, the meter is reset to
0.0 and continues counting.
When the battery is disconnected,
the meter display is reset to 0.0.
The measurement unit of the trip me-
ters can be changed by referring to
the "Setting Menu" in this section.
Gear Position Indicator-
The gear position indicator shows
the corresponding gear position where
the transmission is shifted.
A. Gear Position Indicator
When the transmission is in 1st
gear, "1" is displayed.
When the transmission is in 2nd
gear, "2" is displayed.
When the transmission is in 3rd
gear, "3" is displayed.