Download  Print this page

Brakes - Kawasaki VN1700 Voyager Custom ABS 2010 Owner's Manual

Hide thumbs



Brake Wear Inspection
Inspect the brakes for wear.
each front and rear disc brake caliper,
if the thickness of either pad is less
than 1 mm (0.04 in), replace both pads
in the caliper as a set. Pad replace-
ment should be done by an authorized
Kawasaki dealer.
As for the motorcycle equipped with
K-ACT ABS, the degree of wear of
the front brake pad differs between
the right and left calipers. Be sure to
inspect both front brake pads in the
right and left calipers for wear at the
same time.
A. Lining Thickness
B. 1 mm (0.04 in.)
Disc Brake Fluid -
In accordance with the Periodic
Maintenance Chart, inspect the brake
fluid level in both the front and rear
brake fluid reservoirs and change the
brake fluid. The brake fluid should also
be changed if it becomes contami-
nated with dirt or water.


Table of Contents

This manual is also suitable for:

Vn1700 voyager custom abs 2013

Comments to this Manuals

Symbols: 0
Latest comments: