may be changed according to the fol-
4°C (40 °F)
* : During this time the auxiliary cooling
fan may be activated several times.
Run the engine at idle speed for
about 30 seconds or more. Do not
run the engine at high engine
speed. This fills the oil filter with oil.
Stop the engine, then wait 3 minutes
or more until the oil settles.
Remove the oil filler cap/dipstick.
Wipe the dipstick clean.
With the motorcycle perpendicular to
the ground, thread the oil filler cap/
dipstick fully clockwise then remove.
Idle Time (minutes)*
MAINTENANCE AND ADJUSTMENT
Check the engine oil level on the dip-
stick. The oil level should come up
between the low and high level lines
on the dipstick.
A. Oil Filler Cap/Dipstick
B. Screw in the oil filler cap/dipstick fully to
inspect the oil level.
C. High Level Line
D. Low Level Line
If the oil level is too high, remove the
excess oil through the oil filler