HOW TO RIDE THE MOTORCYCLE
Follow the standard engine starting
Do not operate the starter contin-
uously for more than 5 seconds
or the starter will overheat and
the battery power will drop tem-
porarily. Wait 15 seconds be-
tween each operation of the
starter to let it cool and the bat-
tery power recover.
After the engine has started, discon-
nect the jumper cables. Disconnect
the negative (–) cable from the mo-
Reinstall the removed parts.
Check that the side stand is up.
Pull in the clutch lever.
Shift into 1st gear.
Open the throttle a little, and start to
let out the clutch lever very slowly.
As the clutch starts to engage, open
the throttle a little more, giving the
engine just enough fuel to keep it
A. Shift Pedal