Download  Print this page

Kawasaki Z1000SX 2012 Owner's Manual Page 149

Hide thumbs


Battery Removal
Remove the rider's seat (see Seats
section in the GENERAL INFORMA-
TION chapter).
Remove the red cap from the (+) ter-
Disconnect the cables from the bat-
tery, first from the (–) terminal and
then the (+) terminal.
A. (+) Terminal
B. (–) Terminal
Take the battery out of the case.
Clean the battery using a solution of
baking soda and water. Be sure that
the wire connections are clean.
Battery Installation
Place the battery in the battery case.
Connect the (+) cable to the (+) ter-
minal, and then connect the (–) cable
to the (–) terminal.
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damaged
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the (+) terminal with the red
Reinstall the removed parts.


Table of Contents

This manual is also suitable for:

Z1000sx abs 2012Z1000 2012Z1000 abs 2012

Comments to this Manuals

Symbols: 0
Latest comments: