MAINTENANCE AND ADJUSTMENT
If the above chargers are not avail-
able, use equivalent one.
For more details, ask a Kawasaki
Battery Charging -
Remove the battery from the motor-
cycle (see Battery Removal).
Attach the leads from the charger
and charge the battery at a rate (am-
perage × hours) that is indicated on
the battery. If it is not possible to read
the rate, charge the battery at an am-
perage that is about 1/10th of the
The charger will keep the battery
fully charged until you are ready to
reinstall the battery in the motorcycle
(see Battery Installation).
Never remove the sealing strip,
or the battery can be damaged.
Do not install a conventional bat-
tery in this motorcycle, or the
electrical system cannot work
If you charge the sealed battery,
never fail to observe the instructions
shown in the label on the battery.