Download  Print this page

Kawasaki Z1000SX 2012 Owner's Manual Page 117

Hide thumbs

Advertisement

Turn the right chain adjuster with the
allen wrench so that the notch on the
swingarm and the mark on the chain
adjuster are at the same position on
the left and right sides.
Tighten the axle nut to the specified
torque.
Install the retaining ring.
WARNING
A loose axle nut can lead to an
accident resulting in serious in-
jury or death. Tighten the axle nut
to the proper torque and install a
retaining ring.
Check the rear brake (see Brakes
section in this chapter).
Tightening Torque
Axle Nut: 98 N·m (10 kgf·m, 72 ft·lb)
MAINTENANCE AND ADJUSTMENT
NOTE
The wheel alignment adjustment can
adjust at left chain adjuster also.
If a torque wrench is not available,
this item should be serviced by a Ka-
wasaki dealer.
Wear Inspection
Slide the clip to the right.
A. Clip
B. Slide to right
115

Advertisement

Table of Contents

This manual is also suitable for:

Z1000sx abs 2012Z1000 2012Z1000 abs 2012

Comments to this Manuals

Symbols: 0
Latest comments: