Download  Print this page

Kawasaki Z1000SX 2012 Owner's Manual Page 116

Hide thumbs


Tighten the chain adjuster clamp
bolts to the specified torque.
Rotate the wheel, measure the chain
slack again at the tightest position,
and readjust if necessary.
A loose clamp bolts can lead to
an accident resulting in serious
injury or death. Tighten the clamp
bolts to the proper torque.
Check the wheel alignment.
Check the rear brake (see Brakes
section in this chapter).
Tightening Torque
Chain Adjuster Clamp Bolts:
64 N·m (6.5 kgf·m, 47 ft·lb)
If a torque wrench is not available,
this item should be serviced by a Ka-
wasaki dealer.
Wheel Alignment Adjustment
Remove the right retaining ring, and
loosen the axle nut.
Loosen the right clamp bolt.
A. Retaining Ring
B. Axle Nut
C. Clamp Bolt


Table of Contents

This manual is also suitable for:

Z1000sx abs 2012Z1000 2012Z1000 abs 2012

Comments to this Manuals

Symbols: 0
Latest comments: