Rotate the rear wheel to find the po-
sition where the chain is tightest, and
measure the maximum chain slack
by pulling up and pushing down the
chain midway between the engine
sprocket and rear wheel sprocket.
A. Chain Slack
If the drive chain is too tight or too
loose, adjust it so that the chain
slack will be within the standard val-
MAINTENANCE AND ADJUSTMENT
Drive Chain Slack
Standard: 20 ~ 30 mm (0.8 ~ 1.2 in.)
Chain Slack Adjustment
Loosen the chain adjuster clamp
bolts on the left and right sides.
Turn the chain adjuster with the allen
wrench until the drive chain has the
correct amount of slack.
A. Clamp Bolt
B. Chain Adjuster
C. Allen Wrench