Front Control Console - GE GDF510PxJ Series Technical Service Manual

5. Lift to separate inner and outer door panels.
Outer door has cutouts to receive inner door tabs
To Reassemble the Door
1. Place the outer panel face down on a protected
surface.
2. Place the inner door face up, and position six
attachment tabs into the cutouts of the outer
panel.
3.
panel onto the outer panel using care making
sure the outer panel mates properly to the front
or top console. The below illustration has a
portion of the door sectioned or cut out to show
outer door panel engaged with the attach tabs
of the inner door.
4. Reinstall screws and reinstall the door.

Front Control Console

The Front Control Console is held in place by four
tabs on the pocket handle.
Front Control Console Removal
1. Remove the door and separate the inner and
outer door panels.
2. Remove the vent cover from the inner door.
3. Push down on the pocket handle, then lift up
and away from the console on tabs to release
the console from the pocket handle.
4. Tilt the bottom upward. When both sides are
released, rotate the console to release the tabs
at the top of the console.
– 29 –
Pocket Handle
Locking Tabs