Download  Print this page

Maintenance - Husqvarna W 70 Operator's Manual

Hide thumbs

Advertisement

Table of Contents
Introduction
WARNING: Most accidents involving
machines occur during trouble shooting,
service and maintenance as staff have to
locate themselves within the risk area of the
machine. Prevent accidents by being alert
and by planning and preparing the work.
WARNING: Before you do maintenance of
the product, make sure that the motor switch
and the pump switch are in the Off positions.

Maintenance

Look for signs of wear,
damage or loose con-
nections of the controls
before the unit is con-
nected.
Empty and clean the
tank and the accesso-
ries.
Do a check of the fil-
1
ters.
Do a check of the
wheels. Look for dam-
age and bad connec-
tions. Castor wheel
locks should be working
in order.
Do a check of the func-
tion of the one-way
valve on P-variants.
Do a check of the hose
attachments for me-
chanical wear. Make
sure that the sealing
has full function.
2
Change of filter
Do a check of the hose
gasket and the sealing.
1
Only applicable on W 70 and W 70 P.
2
Only applicable on W 70 and W 70 P.
8
Maintenance
Before each
After every
use
use
X
X
Disconnect the power cord and remove the
pump cable.
WARNING: All checks that involve electric
components should only be performed by a
licensed electrician.
WARNING: Do not puncture the filter. Risk
of dust dispersion.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
Daily
Weekly
X
X
X
X
X
6 months or
12 months or
1000h
2000h
X
1056 - 002 - 02.04.2019

Advertisement

Table of Contents
loading

  Also See for Husqvarna W 70

This manual is also suitable for:

W 70 pW 250 p