Remove And Replace Refrigerator Doors - KitchenAid KRFF507HPS Use & Care Manual

French door bottom mount refrigerator
Hide thumbs Also See for KRFF507HPS:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION INSTRUCTIONS

Remove and Replace Refrigerator Doors

NOTE: Measure the width of your door opening, to see whether or not you need to remove the refrigerator doors to move the refrigerator
into your home. If door removal is necessary, see the following instructions.
IMPORTANT: If the refrigerator was previously installed and you are moving it out of the home, before you begin, turn the refrigerator
control OFF. Unplug the refrigerator or disconnect power. Remove food and adjustable door or utility bins from doors.
Gather the required tools and read all instructions before removing doors.
TOOLS NEEDED: 3/16" hex- key wrench and a #2 Phillips screwdriver
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
Style 1 – Water Dispenser
Tubing Connection
A
A. Outer Ring
Wiring Plug
Top Left Hinge
A
B
C
A. 3/16" Internal hex-head Screws
B. Ground Wire (Do Not Remove)
C. Screws (Do Not Remove)
6
WARNING
Electrical Shock Hazard
Door Removal and Replacement
Style 1 – Water Dispenser
Tubing Connection
A
A. Outer Ring
Top Right Hinge
A
A. 3/16" Internal hex-head Screws
B. Hinge Cover Screw
C. Top Hinge Cover
D. Top Hinge
B
C
D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents