Cut Button; Start Button; 4 Modes Of Back Tracking; 4 Modes Of Moving Forward In A Pattern - Bernina Happy Voyager Resource Manual

Happy Voyager
Interface Control 01
CUT button: Cut the upper and lower thread.
START button: Start to embroider
Note: If held down while embroidering, the ma-
chine temporarily switches into a super slow
mode. When released the speed returns to the
previous embroidery speed.
STOP button: Stop the embroidery process.
Additional functions are different Back tracking
modes.

4 Modes of back tracking:

Press once: Frame moves backwards one stitch.
Press continuously: Frame moves backwards
continuously.
Keep pressing continuously: The button func-
tion locks, the frame moves backwards by 1 stitch
at a time continuously. Stop button must be
pressed to stop.
Keep pressing longer still: The button function
locks, the frame goes back in multiples of 10
stitches at a time continuously. Stop button must
be pressed to stop.
FWD button: Forward Tracking

4 Modes of moving forward in a pattern:

Press once: Frame moves forwards one stitch.
Press continuously: Frame moves forwards
continuously.
Keep pressing continuously: The button func-
tion locks, the frame moves forward by 1 stitch at
a time continuously. Stop button must be pressed
to stop.
Keep pressing longer still: The button function
locks, the frame moves forwards by multiples of
10 stitches at a time continuously. Stop button
must be pressed to stop.